DM_NW_MASTER

 This contains the length of a block (in 32-bit words) to  be
 written by the MASTER on the command INIT.  The block should
 include all BNL787 defined locations that are  ever  written
 to the SSP by the MASTER.



 DM_NW_MASTER_SHORT

 This contains the length of a block (in 32-bit words) to  be
 written  by  the  MASTER  on  commands  other  than the INIT
 command.  This parameter represents the  minimum  number  of
 words that must be written on giving a command.




 DM_NW_STATUS

 This contains the length of a block (in 32-bit words) to  be
 read  by  the  MASTER  after  a  command  has  executed.  It
 includes all words necessary to read a  status  report  from
 the  SSP,  i.e.   it  includes all words up to and including
 $LMORE_INFO, but excludes counter  and  histogram  addresses
 that may be read only once per run.

 Note that a short status length parameter is  not  required,
 since  it is only necessary to read one word ($RET_CODE) for
 this information.




 DM_NW_787_FIXED

 This contains the total length (in 32-bit words) of the area
 in  DM  occupied  by  the  block BNL787 fixed locations.  An
 array  DMDAT  of  length  DM_NW_787_FIXED  is  provided   to
 correspond  to the contents of the BNL787 defined locations.
 For example, the location $COMMAND would correspond  to  the
 array element DMDAT(DM_P_COMMAND/4).

Converted from .HLP to .HTML by HLPTOHTML.