$CRATE

 This marks the start of 27 words of storage  for  the  crate
 contents.

 The number of modules found in the crate  are  contained  in
 location   $CRATE,   followed  by  a  list  (in  consecutive
 locations) of one word  per  module  arranged  in  order  of
 increasing  geographic address, such that the manufacturer's
 ID of the module is stored in bits 16-31, and the geographic
 address in bits 0-15.

 These locations  should  normally  be  filled  during  crate
 initialization.




 $CABLE

 This marks  the  start  of  16  words  of  storage  for  the
 Manufacturer's  IDs  of  modules on the cable segment (which
 are expected to be SSPs).

 The number of modules found on the cable segment  is  stored
 at  location  $CABLE,  followed  by  a  list (in consecutive
 locations) of  one  word  per  module  found,  in  order  of
 increasing    geographical    address,    such    that   the
 manufacturer's  ID  is  stored  in  bits  16-31,   and   the
 geographical address in bits 0-15.

 Only the master will fill these locations.

Converted from .HLP to .HTML by HLPTOHTML.