-------------
	UMC new flags
	-------------
					Takeshi K. Komatsubara [KEK]
					 latest update: 2002 Dec 04(Wed)
					 -------------------------------

	 * See alldat.F for details.

	 * Pleae check your .par files to see whether the parameters are
	   properly set for your purpose.
	   Summarized below are the default values set in alldat.F. 


 - IRSTSC = 2     [new RS thickness: 
                    T 0.700cm, L2-18 1.905cm, L19 0.9525cm] 
  
 - IRSVER = 2     [RS+BVL]

 - ITRVER = 3	  [E949 trigger]


 - B0FCTR = 1.0	  [correction to B-field]

 - MODRFT = 61    [UTC: 2nd bit obsolete]


 - IMSCTF =  0	  [still the old formula used in UMC v6 and in PDG 90]
          --> 1 : more accurate formula in PDG 92 and later. 


 - IBMCUT = 1010  [cuts on the beam file in E787 96-97 and 98]


 - ITAPWR = 1     [write MONT bank]

 - EVCPMX = 200.  [pre-event CPU time limit in seconds]


 - MODEVP = 0	  [switch defalt back to 0]


 - THSMBL = 5.0	  [Energy threshold for BVL analog-sum PV, same as THSMBV]

 - ATLBV  =  87.  [attenuation length in BV]
   ATLRS  = 150.  [attenuation length in RS]
   ATLBL  = 180.  [attenuation length in BL]

 - BETABV = 0.5817  [velocity of light over c in BV]
   BETARS = 0.5230  [velocity of light over c in RS]
   BETABL = 0.5671  [velocity of light over c in BL]

-----