(This file is ~csi/collar/collar_doc.txt)		7/3/01

Upstream:

	PMT	 HV	Signal	Split	FERA	Initial	Fera	 HV
	S/N	cable	cable	row-col	cable	 HV	chan	chan
	-----	-----	------	-------	-----	------	-------	-----

COM1	29054	ECM1	ECM1	 7-21	87-00   -1850V	16,15,0	5,8,0
COM2	29022	ECM2	ECM2	 8-21	87-01   -2050	16,15,1	5,8,1
COM3	28966	ECM3	ECM3	 9-21	87-02   -1810	16,15,2	5,8,2
COM4	30864	ECM4	ECM4	 9-20	87-03   -1800	16,15,3	5,8,3
COM5	28270	ECM5	ECM5	 9-19	87-04   -1890	16,15,4	5,8,4
COM6	24981	ECM6	ECM6	 9-18	87-05   -1970	16,15,5	5,8,5
COM7	30673	ECM7	ECM7	 9-17	87-06   -1810	16,15,6	5,8,6
COM8	30865	ECM8	ECM8	10-21	87-07   -1700	16,15,7	5,8,7
COM9	30953	ECM9	ECM9	10-20	87-08   -1750	16,15,8	5,8,8
COM10	28739	ECM10	ECM10	10-19	87-09   -1850	16,15,9	5,8,9
COM11	28968	ECM11	ECM11	10-18	87-10   -1810	16,15,10 5,8,10
COM12	28697	ECM13	ECM12	10-17	87-11   -1850	16,15,11 5,8,11


Downstream:

	PMT	 HV	Signal  Split	FERA	Initial	Fera	 HV
	S/N	cable	cable	row-col	cable	 HV 	chan	chan
	-----  --------	------  ------	-----	------	-----	-----

COP1	28942	ECP1	ECP1	17-21	88-00	-1750V	16,16,0	5,9,0
COP2	27301	ECP2	ECP2	18-21	88-01	-1900	16,16,1	5,9,1
COP3	29127	ECP3	ECP3	19-21	88-02	-2000   16,16,2	5,9,2
COP4	28931	ECP4	ECP4	19-20	88-03	-1800   16,16,3	5,9,3
COP5	28819	ECP5	ECP5	19-19	88-04	-1900   16,16,4	5,9,4
COP6	28953	ECP6	ECP6	19-18	88-05	-1800   16,16,5	5,9,5
COP7	28923	ECP9	ECP7	19-17	88-06	-1750   16,16,6	5,9,6
COP8	28941	ECP10	ECP8	20-21	88-07	-1750   16,16,7	5,9,7
COP9	28705	ECP11	ECP9	20-20	88-08	-1900   16,16,8	5,9,8
COP10	28730	ECP12	ECP10	20-19	88-09	-1800   16,16,9	5,9,9
COP11	28710	ECP13	ECP11	20-18	88-10	-1900   16,16,10 5,9,10
COP12	28945	ECP14	ECP12	20-17	88-11	-1750   16,16,11 5,9,11



Notes: 1) initial HV settings were set to make maximum pulse height
          from Bi source (approx. 1 MeV deposited) to be ~200 mV at
          upstairs end of cable (before the splitter). 

       2) The correspondence between sector number and physical
          location follows the usual convention.  Sector 1 is to
          your left looking downstream; sector numbering increases
          clockwise looking downstream.

       3) The new downstream collar is readout with fibers. The gains
	  of the PMTs have been equalized based on cosmic data.
	
	4) The collar uses a BV splitter with a split of 1:2:1.2
           (discriminator:Fera:analog_sum)
	   
        5) The new upstream collar is readout with fibers. The gains
	of the PMTs have been equalized based on Ru106 test.