Boot parameters as of Mar. 21


PPC01

[VxWorks Boot]: p

boot device          : dc
processor number     : 0 
host name            : e787daq1
file name            : /var/boot/mv2604/vxWorks
inet on ethernet (e) : 192.168.19.3
host inet (h)        : 192.168.19.1
gateway inet (g)     : 192.168.19.1
user (u)             : online
flags (f)            : 0x80 
target name (tn)     : e787daq3
startup script (s)   : /var/boot/mv2604/vxWorks01.dc.startup

PPC02

[VxWorks Boot]: p

boot device          : dc
processor number     : 0 
host name            : e787daq2
file name            : /var/boot/mv2307/vxWorks
inet on ethernet (e) : 192.168.19.4
host inet (h)        : 192.168.19.2
gateway inet (g)     : 192.168.19.2
user (u)             : online
flags (f)            : 0x80 
target name (tn)     : e787daq4
startup script (s)   : /var/boot/mv2307/vxWorks02.dc.startup

PPC03

[VxWorks Boot]: p

boot device          : dc
processor number     : 0 
host name            : e787daq7
file name            : /var/boot/mv2604/vxWorks
inet on ethernet (e) : 192.168.19.5
host inet (h)        : 192.168.19.7
gateway inet (g)     : 192.168.19.7
user (u)             : online
flags (f)            : 0x80 
target name (tn)     : e787daq5
startup script (s)   : /var/boot/mv2604/vxWorks03.dc.startup

PPC04

[VxWorks Boot]: p

boot device          : dc
processor number     : 0 
host name            : e787daq7
file name            : /var/boot/mv2604/vxWorks
inet on ethernet (e) : 192.168.19.6
host inet (h)        : 192.168.19.7
gateway inet (g)     : 192.168.19.7
user (u)             : online
flags (f)            : 0x80 
target name (tn)     : e787daq6
startup script (s)   : /var/boot/mv2604/vxWorks04.dc.startup


If you need to change the parameters, type 
[VxWorks Boot]: c
You will be prompted for each parameter.
Carriage Return does not change the entry


	List of commands

[VxWorks Boot]: ?

 ?                     - print this list
 @                     - boot (load and go)
 p                     - print boot params
 c                     - change boot params
 l                     - load boot file
 g adrs                - go to adrs
 d adrs[,n]            - display memory
 m adrs                - modify memory
 f adrs, nbytes, value - fill memory
 t adrs, adrs, nbytes  - copy memory
 e                     - print fatal exception
 n netif               - print network interface device address
 $dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=# 
                           tn=targetname s=script o=other 
 boot device: scsi=id,lun              file name: /sd0/vxWorks 
 Boot flags:           
   0x02  - load local system symbols 
   0x04  - don't autoboot 
   0x08  - quick autoboot (no countdown) 
   0x20  - disable login security 
   0x40  - use bootp to get boot parameters 
   0x80  - use tftp to get boot image 
   0x100 - use proxy arp 

available boot devices: dc exp scsi

Note: If PPC is running vxWorks, type Ctrl-Z to start boot sequence.